rclip ver1.1

rclip is a tool copy text from remote host to local system cliboard;

it is specifically designed for copy seletected text in tmux copy-mode on a remote host to local system cliboard over network; which is a big pain point of using tmux;

how does it work?

first run rclip as reflector role on remote host, which is processing listening on two ports over TLS:

• rcv_port: default 8891
• send_port: default 8890

the ports could be changed by commandline parameters

any text received on rcv_port will be forwarded to send_port

run rclip as sender role on local system, it connects to the send_port of reflector, and copy the received text to local system clipboard

configure tmux so that the tmux copy-pipe command invoke rclip as receiver role, which connects to rcv_port of reflector, and send selected text to reflector;

why this 3 party design?

this is to get around firewall between remote host and local system; remote host is typicall a server, while local system is typically a client device like a laptop;

if you use VPN to remote access the server, there typically will be a firewall between server and local system, and that firewall will likely to block any connection initiated by server to the local system; so a simple client and server design won't work

rclip also send keepalive message every 40 seconds between reflector and sender to avoid firewall idle timeout the TCP connection;

security

rclip use TLS to secure communication between reflector, sender and receiver; it also uses client authentication with its own root CA to prevent spoof;

by default, rclip sender and receiver will check SAN(Subject Alternative Name) of reflector's certificate, to see the reflector's IP or FQDN match its certificate SAN; however this check could be skipped by using a hard coded "1.1.1.1" in SAN of reflector certificate when parameter "-loose" is specified; this is to avoid hassle to create a different certificate for each remote host; this of course decrease the overall security, but personally think it is acceptable trade-off given user typically specify the reflector address on local system directly;

build

rclip is coded with golang ver1.9, just use "go build" in the source directory to build the binary; golang pkg required:

• github.com/atotto/clipboard

install

since rclip use TLS and its own CA, so following key and certificates are needed to generated before installation:

• root CA cert/key
• reflector key/cert
• sender key/cert
• receiver key/cert

notes:

• there are many opensource tools could generate key and certs like openssl or XCA
• If you want to skip SAN check, make sure there is SubjectAltName extension with "1.1.1.1" as ip addresss in the certificate of reflector

rclip expect above key/certs located in following directory:

• Windows: [windows_user_dir]\appdata\AppData\Roaming\rclip
• Linux/OSX: $HOME/.rclip/

on remote host where tmux is running, following cert/keys with expected file name are needed:

• root CA cert: ca_cert
• reflector cert/key: refl_cert/refl_key
• receiver cert/key: rcv_cert/rcv_key

on local system, following cert/keys are needed:

• root CA cert: ca_cert
• sender key/cert: sender_cert/sender_key

all cert/key files's permission should be set that only owner could read

add following line in your .tmux.conf on remote host:

bind-key -T copy-mode-vi _your_key_of_choice_ send-keys -X copy-pipe "_rclip_install_path_/rclip"

this is an example:

bind-key -T copy-mode-vi y send-keys -X copy-pipe "/usr/local/bin/rclip"

note: if you want to skip SAN check, add "-loose"; e.g.

bind-key -T copy-mode-vi _your_key_of_choice_ send-keys -X copy-pipe "_rclip_install_path_/rclip -loose"

note: invoke rclip without any parameter, it will run as receiver, and connects to reflector on the same host, using default recv_port

usage

on remote host:

• start reflector process:

rclip -role refl

on local system:

• start sender process:

rclip -role sender -refl_ip <remote_host_ip>

note: if you want to skip SAN check, add "-loose"; e.g.

rclip -role sender -refl_ip <remote_host_ip> -loose

To make a remote copy: go into tmux copy mode on remote host, select some text, press the specified key, voila, the text are copied into local clipboard, secury & easy;

CLI Parameter

remote clipboard, version 1.1
flag provided but not defined: -?
Usage of rclip:
  -loose
        use hard coded address for reflector certificate SAN check
  -rcv_port uint
        specify the port for receiver on reflector (default 8891)
  -refl_ip string
        reflector listening ip address
  -role string
        specify the role, rcv/refl/sender (default "rcv")
  -send_port uint
        specify the port for sender on reflector (default 8890)

license

MIT; https://opensource.org/licenses/MIT