A cross-platform C# / .NET 7 based command line interface for meshtastic.
Description:
Meshtastic.Cli
Usage:
Meshtastic.Cli [command] [options]
Options:
--port <port> Target serial port for meshtastic device
--host <host> Target host ip or name for meshtastic device
--output <Json|PrettyConsole> Type of output format for the command
-l, --log <Critical|Debug|Error|Information|None|Trace|Warning> Logging level for command events [default: Information]
--dest <dest> Destination node address for command
-sd, --select-dest Interactively select a destination from device's node list [default: False]
--version Show version information
-?, -h, --help Show help and usage information
Commands:
list List available serial ports
monitor Serial monitor for the device
live Show a live dashboard for the device
info Dump info about the device
get Display one or more settings from the device
set Save one or more settings onto the device
channel <Add|Disable|Enable|Save> Enable, Disable, Add, Save channels on the device
url <Get|Set> <url> Get or set shared channel url []
reboot <seconds> Reboot the device [default: 5]
metadata Get device metadata from the device
factory-reset Factory reset configuration of the device
fixed-position <lat> <lon> <altitude> Set the device to a fixed position [default: 0]
text <message> Send a text message from the device
remove-node <nodenum> Remove single node by nodenum from node db of the device
reset-nodedb Reset the node db of the device
trace-route Trace the sequence of nodes routing to the destination
waypoint <lat> <lon> Send a waypoint from the device
file <path> Get or send a file from the device
waypoint <lat> <lon> Send a waypoint from the device
file <path> Get or send a file from the device
update Update the firmware of the serial connected device
export Export the profile of the connected device as yaml
import Import the profile export from a yaml file and set the connected device
mqtt-proxy Proxy to the MQTT server referenced in the MQTT module config of the connected device
request-telemetry Request a telemetry packet from a repeater by nodenum
capture Capture all of the FromRadio messages for the device and store in MongoDB instance
PS C:\Users\bmeadors\Documents\GitHub\c-sharp> dotnet run --project ./Meshtastic.Cli/Meshtastic.Cli.csproj --port COM5
Required command was not provided.
Description:
Meshtastic.Cli
Usage:
Meshtastic.Cli [command] [options]
Options:
--port <port> Target serial port for meshtastic device
--host <host> Target host ip or name for meshtastic device
--output <Json|PrettyConsole> Type of output format for the command
-l, --log Logging level for command events [default: Information]
<Critical|Debug|Error|Information|None|Trace|Warning>
--dest <dest> Destination node address for command
-sd, --select-dest Interactively select a destination from device's node list
[default: False]
--version Show version information
-?, -h, --help Show help and usage information
Commands:
list List available serial ports
monitor Serial monitor for the device
live Show a live dashboard for the device
info Dump info about the device
get Display one or more settings from the device
set Save one or more settings onto the device
channel <Add|Disable|Enable|Save> Enable, Disable, Add, Save channels on the device
url <Get|Set> <url> Get or set shared channel url []
reboot <seconds> Reboot the device [default: 5]
metadata Get device metadata from the device
factory-reset Factory reset configuration of the device
fixed-position <lat> <lon> <altitude> Set the device to a fixed position [default: 0]
text <message> Send a text message from the device
remove-node <nodenum> Remove single node by nodenum from node db of the device
reset-nodedb Reset the node db of the device
trace-route Trace the sequence of nodes routing to the destination
canned-messages <Get|Set> <messages> Get or set the collection of canned messages on the device [operation: Get, ]
waypoint <lat> <lon> Send a waypoint from the device
file <path> Get or send a file from the device
update Update the firmware of the serial connected device
export Export the profile of the connected device as yaml
import Import the profile export from a yaml file and set the connected device
mqtt-proxy Proxy to the MQTT server referenced in the MQTT module config of the connected
device
request-telemetry Request a telemetry packet from a repeater by nodenum
- Install the latest dotnet 7 sdk for your platform
- Install the Meshtastic.Cli nuget package as a dotnet tool via
dotnet tool install --global Meshtastic.Cliin your terminal of choice
- Navigate to the Releases page in this github repsitory
- Download and extract the zip archive with the standalone executable for your platform
- Execute it in the terminal of your choice (this may require security allowances or display warnings on some platforms)
- Execute
dotnet tool update Meshtastic.Cli -gin your terminal of choice
