sam-fusee-launcher-xiao

Fusee Launcher for the Seeed Studio XIAO SAMD21 board. Based on sam fusee launcher.

Build and tested with Arduino SDK.

Build

Go through Download Arduino and install Arduino driver and How to Add Seeed boards to Arduino IDE

Summary:

• Download and install arduino IDE http://www.arduino.cc/en/Main/Software
• In Arduino: go to "Prefences" and add to "Additional Board Manager URLs" following URL:
• https://files.seeedstudio.com/arduino/package_seeeduino_boards_index.json
• Go to "Tools > Board > Board Manager" and select Type: xiao and
• Install "Seeed SAMD Boards" by Seeed Studio
• Select the Seeeduino XIAO with "Tools > Board > Seeed SAMD Boards"

Connect the board to your computer and short the RST pins twice. Your computer should detect the board automatically.

Got to Tools > Port and select your connected board.

Download this Repository, open main/main.ino with Arduino IDE.

Then Verify/Compile (Ctrl + R) If no errors appear Upload (Ctrl + U).

The board is ready for use.

LED is:

• 🟠 Steady orange - Failed to initialize USB on SAMD, check battery
• 🟠 Quick, steady orange blinking - Ready to send, searching for Switch. Insert RCM jig, Hold VOL + and Press Power
• 🔵 Short/Long (Ta Daa!) blue blink - Payload sent and activated.

Update the Payload

Download your favorite payload as a .bin file. Run the python script tools/binConverter.py with the path to the file as an argument: python binConverter.py "C:\pathToMyPayload\hekateNew.bin or just drag the .bin file on the script

in the same folder as the .bin file is located, a new .h file should appear. Copy the new file to the main folder and in the main.ino go to line 6 #include "hekate_ctcaer_6.0.7.h" and rename it to your new file #include "hekateNew.h"

Then just compile and upload.

Hardware

XIAO SAMD21 - Cortex M0+

Thanks to:

• atlas44
• CTCaer
• Ninoh-FOX
• noemu
• electronrancher
• and everyone else i forgot